2014 06 03 17 17 47 Sirolo

Monte Conero 1920x512

Monte Conero 1920x512

Ubuntu

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active

{jcomments off}

Part 1: Set Up An AWS Instance With Sufficient EBS Storage Space

Introduction

In this article I set up an AWS EC2 Instance from scratch to run VirtualMin, an open-source virtual server management tool. While Virtumin can be set up on an in-use server, it requires a lot of reconfiguration so it is simpler to set up a new server and proceed from there. At the end of this article we shall have a clean install of VirtualMin ready to accept new websites. This is part 1 where we set up an AWS instance with sufficient storage space to host our virtualmin system.

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active

{jcomments off}

Part 2: Prepare Ubuntu LTS To Accept VirtualMin

Introduction

In this article I set up an AWS EC2 Instance from scratch to run VirtualMin, an open-source virtual server management tool. While Virtumin can be set up on an in-use server, it requires a lot of reconfiguration so it is simpler to set up a new server and proceed from there. At the end of this article we shall have a clean install of VirtualMin ready to accept new websites. This is part 2 where we prepare our Ubuntu system to accept VirtualMin.

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active

{jcomments off}

Part 3: Download and Install Virtualmin

Introduction

In this article I set up an AWS EC2 Instance from scratch to run VirtualMin, an open-source virtual server management tool. While Virtumin can be set up on an in-use server, it requires a lot of reconfiguration so it is simpler to set up a new server and proceed from there. At the end of this article we shall have a clean install of VirtualMin ready to accept new websites. This is part 3 where we download and install Virtualmin.

User Rating: 5 / 5

Star ActiveStar ActiveStar ActiveStar ActiveStar Active

{jcomments off}

Part 4: Prepare VirtualMin to run websites

Introduction

In this article I set up an AWS EC2 Instance from scratch to run VirtualMin, an open-source virtual server management tool. While Virtumin can be set up on an in-use server, it requires a lot of reconfiguration so it is simpler to set up a new server and proceed from there. At the end of this article we shall have a clean install of VirtualMin ready to accept new websites. This is part 4 where we prepare our Virtualmin setup to run websites.